LightRay UV Sewer Repair Systems

LIGHTRAY LrI

LATERAL INVERSION

The vision of LightRay is to provide next-generation UV technology to the CIPP industry using specially designed low voltage cold source LED UV lights and higher strength pre-impregnated glass fiber pipe-liners, for the ZERODIGTM contracting industry involved in small diameter pipe infrastructure repairs.

curing at the speed of light2

lightray = Better than all the rest

LightRay’s state-of-the-art Cast-in-Place-Pipe technology ushers the Trenchless industry into the twenty-first century, offering new opportunities for plumbers and municipal contractors by significantly reducing time and resources, lowering risks and costs with much faster and higher quality results compared to the older traditional thermal heat or ambient curing processes.

lightray lateral inversion

Perfect Cast in minutes

The new LightRay LRI system is the most advanced entrant to the UV cast inversion liner market.  Our simple system allows the operator complete control over the process and very closely resembles traditional ambient cure inversion methods. 

Low-voltage & internally protected

50-foot lighttrain

The difference is that we can accomplish throughput of up to 6.3 feet per minute of curing with the proprietary double strand, cold LED light train, that requires no heat to cure the liner.  The light train is offered in a standard length of 50 feet and only requires low-voltage to cast and is internally protected to accommodate bends in pipes up to 90 degrees.

50-ft-uv-lighttrain

no resin materials required

zero-refrigeration

No more carrying resin materials in your truck or trailer and no need to measure and mix on site. LightRay liners arrive ready to install without any need for refrigeration. This greatly reduces the variability from mixing and preparing liners but also eliminates the requirement for extra equipment in the field allowing for rapid deployment of the system. The LRI system uses non-thermal UV casting resin that is temperature stable and only activated by UV light coupled with high-strength flexible fiberglass coated liners. No matter the temperature in the working environment, the casting times are consistent every time.

uv-lighttrain

still not convinced? check out the

features & benefits

Play Video about casting at the speed of light

did you know...

lightray is proudly made in the u.s.a.

The LightRay product line is completely designed, manufactured, built and supported in the United States of America! The quality is best in class and you can trust Waterline Renewal Technologies to be here for you if and when you need support on this system. 

made-in-usa-sewer-equipment

Made in the U.S.A. means a lot. We take great pride in manufacturing this ultraviolet lining system here in the United States. Our pride shows in the component quality & longevity of this new UV system.

LightRay UV Sewer Repair Systems

get the latest uv technology in your toolbox

The new LightRay LRI system is the most advanced entrant to the UV cast inversion liner market.  Our simple system allows the operator complete control over the process and very closely resembles traditional ambient cure inversion methods.  The difference is that we can accomplish throughput of up to 6.3 feet per minute of casting with the proprietary double strand, cold LED light train, that requires no heat to cast the liner.  The light train is offered in a standard length of 50 feet and only requires low-voltage to cast and is internally protected to accommodate bends in pipes up to 90 degrees.

cast 150ft

at 6.3 ft/minute

The 50 foot light train incorporates double strand, cold LED lights for industry leading cast times and does not rely on heat to cast the liner

dont wait... be one of the first in line

Now is your chance to take your sewer lateral lining game to the next level. Reserve your new LightRay LRI system today and be the best sewer contractor you can be.
Offer your clients the very best in UV casting technologies.